Show Bgp Ipv6 Community - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

For e series broadband service routers
Table of Contents

Advertisement

show bgp ipv6 community

show bgp ipv6
Syntax
[ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ]
community { communityNumber | local-as | no-advertise | no-export }
[ communityNumber | local-as | no-advertise | no-export ]*
[ exact-match ] [ fields { fieldOptions } ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
route-target signaling keywords added in JUNOSe Release 8.2.0.
Displays routes that belong to the specified BGP community.
Description
Options
unicast Specifies the IPv6 unicast address family and routing table; the default
option
multicast Specifies the IPv6 multicast address family and routing table
vpnv6 all Specifies the VPN-IPv6 address family and all IPv6 VPN routing and
forwarding instances
vpn6 vrf vrfName Specifies the VPN-IPv6 address family and only the IPv6 VPN
routing and forwarding instance with the name vrfName
route-target signaling Specifies the route-target address family
communityNumber Filters routes according to this community number, specified
either as a number in the range 1–4294967295 or in AA:NN format (autonomous
system number:community number); displays only routes that are members of
the specified community
local-as Displays only routes belonging to the local AS community
no-advertise Displays only routes belonging to the no-advertise community
no-export Displays only routes belonging to the no-export community
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
exact-match Displays only routes that have exactly the specified communities
fields Displays only the specified fields; the display order of the fields is
hard-coded and not affected by the order in which you enter them
fieldOptions Fields to be displayed, in the format
all | [ afi | aggregator | as-path | atomic-aggregate | best | clusters | communities
| extended-communities | imported | intro | in-label | loc-pref | med | next-hop
| next-hop-cost | origin | originator-id | out-label | peer | peer-type | rd | safi |
stale | unknown-types | weight ]*
all All available information; not recommended, because this information
for each network does not fit on a single line and is difficult to read
afi Address family identifier
aggregator AS number and IP address of aggregator
Chapter 7: S Commands
show bgp ipv6 community
569

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 and is the answer not in the manual?

This manual is also suitable for:

Junose 11.1.x

Table of Contents