Configuring Network Connect On A Secure Access Device User Role; Procedure); Configuring Network Connect On A Secure Access Device User Role (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Configuring Network Connect on a Secure Access Device User Role (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
The Network Connect option provides secure, SSL-based network-level remote access
to all enterprise application resources using the Secure Access device over port 443.
To configure network connect on a user role:
In the navigation tree, select Device Manager > Devices. Click the Device Tree tab,
1.
and then double-click the Secure Access device for which you want to configure a
user-role access option.
Click the Configuration tab. Select Users > User Roles.
2.
Click the New button. The New dialog box appears.
3.
Add or modify settings as specified in Table 16 on page 69.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 16: User Role Network Connect Configuration Details
Option
Network Connect tab
Chapter 8: Configuring Access Options using Remote Access Mechanisms
Function Your Action
69