Creating Or Modifying Classifier Control Lists For L2Tp Policy Lists; Creating Or Modifying Classifier Control Lists For Mpls Policy Lists; Creating Or Modifying Classifier Control Lists For Vlan Policy Lists - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Related
Documentation

Creating or Modifying Classifier Control Lists for L2TP Policy Lists

Related
Documentation

Creating or Modifying Classifier Control Lists for MPLS Policy Lists

Related
Documentation

Creating or Modifying Classifier Control Lists for VLAN Policy Lists

Copyright © 2010, Juniper Networks, Inc.
Issue the ipv6 classifier-list command:
host1(config)#ipv6 classifier-list ipv6classifier color red user-packet-class 5 tcfield 10
host1(config)#ipv6 classifier-list YourListName udp destination-port eq 75
host1(config)#ipv6 classifier-list telnetConnects tcp destination-port eq 23 tcp-flags
"syn & !ack"
host1(config)#ipv6 classifier-list listname icmpv6 icmp-type 3 icmp-code 6
host1(config)#ipv6 classifier-list svale20 source-route-class 1
host1(config)#ipv6 classifier-list svale30 destination-route-class 1 tcfield 10
host1(config)#ipv6 classifier-list svale40 source-route-class 1 local true
host1(config)#ipv6 classifier-list west25 source-route-class 1 local false
host1(config)#ipv6 classifier-list YourClaclList source-host 2001:db8:1::8001
destination-address 2001:db8:3::/48
ipv6 classifier-list
You can create or modify a classifier control list that can be used only in L2TP policy lists.
Issue the l2tp classifier-list command:
host1(config)#l2tp classifier-list l2tpclassifier color red user-packet-class 7
l2tp classifier-list
You can create or modify a classifier control list that can be used only in MPLS policy
lists.
Issue the mpls classifier-list command:
host1(config)#mpls classifier-list mplsClass user-packet-class 10 exp-bits 3 exp-mask
5
mpls classifier-list
You can create or modify a classifier control list that can be used only in VLAN policy
lists.
Issue the vlan classifier-list command:
host1(config)#vlan classifier-list lowLatencyLowDrop user-priority 7
host1(config)#vlan classifier-list lowLatencyLowDrop user-priority 6
host1(config)#vlan classifier-list lowLatency user-priority 5
host1(config)#vlan classifier-list excellentEffort user-priority 4
host1(config)#vlan classifier-list bestEffort user-priority 3
host1(config)#vlan classifier-list bestEffort user-priority 2
Chapter 2: Creating Classifier Control Lists for Policies
13