L2Tp Ignore-Transmit-Address-Change - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
l2tp ignore-transmit-address-change
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] l2tp ignore-transmit-address-change [ ip-address | udp-port ]
Command introduced before JunosE Release 7.1.0.
ip-address and udp-port keywords added in JunosE Release 7.1.0.
Specifies that E Series routers ignore address changes in Start-Control-Connection-Reply
(SCCRP) control packets received from the remote endpoint. If you do not include a
keyword, the router ignores the entire address change. The no version restores the default,
which causes the router to accept address changes in response to SCCRP packets.
ip-address—Ignores only IP address changes
udp-port—Ignores only UDP port number changes
Global Configuration
Chapter 12: L Commands
1171
Advertisement
Table of Contents
