Ssh Client Authentication Server - H3C S5120-SI Series Command Reference Manual

Examples
# Display the mappings between host public keys and SSH servers saved on the client.
<Sysname> display ssh server-info
Server Name(IP)
______________________________________________________
192.168.0.1
192.168.0.2
Table 1-4 display ssh server-info command output description
Server Name(IP)
Server public key name

ssh client authentication server

Syntax
ssh client authentication server server assign publickey keyname
undo ssh client authentication server server assign publickey
View
System view
Default Level
2: System level
Parameters
server: IP address or name of the server, a string of 1 to 80 characters.
assign publickey keyname: Specifies the name of the host public key of the server, a string of 1 to 64
characters.
Description
Use the ssh client authentication server command on a client to configure the host public key of a
specified server so that the client can determine whether the server is trustworthy.
Use the undo ssh authentication server command to remove the configuration.
By default, the host public key of the server is not configured, and when logging into the server, the
client uses the IP address or host name used for login as the public key name.
If the client does not support first-time authentication, it will reject unauthenticated servers. In this case,
you need to configure the public keys of the servers and specify the mappings between public keys and
servers on the client, so that the client uses the correct public key of a server to authenticate the server.
Note that the specified host public key of the server must already exist.
Related commands: ssh client first-time enable.
Server public key name
abc_key01
abc_key02
Field
1-10
Description
Name or IP address of the server
Name of the host public key of the server