Sftp Client Configuration On The Switch - H3C S3100-52P Operation Manual

Operation Manual – SSH Terminal Service
H3C S3100-52P Ethernet Switch
Setting connection idle timeout
I. Configuring service type for an SSH user
Table 1-12 Configure service type for an SSH user
Enter system view
Configure service type for
an SSH user
II. Enabling SFTP Server
Table 1-13 Enable SFTP Server
Enter system view
Enable SFTP Server
III. Setting connection idle timeout time
You can set the idle timeout time for SFTP connections, so that the system can
automatically release a user connection when the user connection is idle for a time
longer than the time threshold you set.
Table 1-14 Set connection idle timeout time
Enter system view
Set idle timeout time for
SFTP connections

1.2.3 SFTP Client Configuration on the Switch

The following table describes SFTP Client configuration tasks on the switch:
Operation
system-view
ssh
service-type { stelnet |
sftp | all }
Operation
system-view
sftp server enable
Operation
system-view
sftp
time-out-value
Command
user username
Command
Command
timeout
1-24
Chapter 1 SSH Terminal Service
Description
—
Optional
By default, the service
type available for a user is
stelnet.
Description
—
Required
By default, SFTP Server
is disabled.
Description
—
Required
By default, the connection
idle timeout time is 10
minutes.