Display Sftp Client Source - H3C S5120-SI Series Command Reference Manual

With the remote-path not specified, the command displays information about the files and
sub-directories of the current working directory.
This command functions as the ls command.
Examples
# Display detailed information about the files and sub-directories under the current working directory in
the form of a list.
sftp-client> dir
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
drwxrwxrwx 1 noone
drwxrwxrwx 1 noone
-rwxrwxrwx 1 noone

display sftp client source

Syntax
display sftp client source
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display sftp client source command to display the source IP address or source interface
currently set for the SFTP client.
If neither source IP address nor source interface is specified for the SFTP client, the system will display
such a message "Neither source IP address nor source interface was specified for the SFTP client."
Related commands: sftp client source.
Examples
# Display the source IP address of the SFTP client.
<Sysname> display sftp client source
The source IP address you specified is 192.168.0.1
nogroup 1759 Aug 23 06:52 config.cfg
nogroup 225 Aug 24 08:01 pubkey2
nogroup 283 Aug 24 07:39 pubkey1
nogroup 225 Sep 28 08:28 pub1
nogroup 0 Sep 28 08:24 new1
nogroup 0 Sep 28 08:18 new2
nogroup 225 Sep 28 08:30 pub2
1-18