To do...
Clear buffered stop-accounting
requests that get no responses
Configuring HWTACACS
Different from RADIUS, except for deleting HWTACACS schemes and changing the IP addresses of
the HWTACACS servers, you can make any changes to HWTACACS parameters, whether there are
users online or not.
Creating a HWTACACS scheme
The HWTACACS protocol is configured on a per scheme basis. Before performing other HWTACACS
configurations, follow these steps to create a HWTACACS scheme and enter HWTACACS scheme
view:
To do...
Enter system view
Create a HWTACACS scheme
and enter HWTACACS scheme
view
Up to 16 HWTACACS schemes can be configured.
A scheme can be deleted only when it is not referenced.
Specifying the HWTACACS Authentication Servers
Follow these steps to specify the HWTACACS authentication servers:
To do...
Enter system view
Create a HWTACACS scheme
and enter HWTACACS scheme
view
Use the command...
reset stop-accounting-buffer
{ radius-scheme
radius-server-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
Use the command...
system-view
hwtacacs scheme
hwtacacs-scheme-name
Use the command...
system-view
hwtacacs scheme
hwtacacs-scheme-name
1-31
Remarks
Available in user view
Remarks
—
Required
Not defined by default
Remarks
—
Required
Not defined by default