Configuring Hwtacacs; Creating A Hwtacacs Scheme; Specifying The Hwtacacs Authentication Servers - H3C S5120-EI Series Operation Manual

To do...
Clear buffered stop-accounting
requests that get no responses

Configuring HWTACACS

Different from RADIUS, except for deleting HWTACACS schemes and changing the IP addresses of
the HWTACACS servers, you can make any changes to HWTACACS parameters, whether there are
users online or not.

Creating a HWTACACS scheme

The HWTACACS protocol is configured on a per scheme basis. Before performing other HWTACACS
configurations, follow these steps to create a HWTACACS scheme and enter HWTACACS scheme
view:
To do...
Enter system view
Create a HWTACACS scheme and
enter HWTACACS scheme view
Up to 16 HWTACACS schemes can be configured.
A scheme can be deleted only when it is not referenced.

Specifying the HWTACACS Authentication Servers

Follow these steps to specify the HWTACACS authentication servers:
To do...
Enter system view
Create a HWTACACS scheme
and enter HWTACACS scheme
view
Use the command...
reset stop-accounting-buffer
{ radius-scheme radius-server-name |
session-id session-id | time-range
start-time stop-time | user-name
user-name } [ slot slot-number ]
Use the command...
system-view
hwtacacs scheme
hwtacacs-scheme-name
Use the command...
system-view
hwtacacs scheme
hwtacacs-scheme-name
1-30
Remarks
Available in user
view
Remarks
—
Required
Not defined by default
Remarks
—
Required
Not defined by default