Creating A Hwtacacs Scheme; Configuring Hwtacacs Authentication Servers - H3C S7500 Series Operation Manual

Operation Manual – AAA & RADIUS & HWTACACS & EAD
H3C S7500 Series Ethernet Switches

Configuring HWTACACS Authentication Servers

Configuring HWTACACS Authorization Servers
Configuring HWTACACS Accounting Servers
Configuring Shared Keys for HWTACACS Packets
Configuring the Attributes for Data to be Sent to TACACS Servers
Configuring the Timers of TACACS Servers

1.5.1 Creating a HWTACACS Scheme

HWTACACS protocol is configured scheme by scheme. Therefore, you need to create
a HWTACACS scheme and enter HWTACACS view before you perform other
configuration tasks.
Table 1-23 Create a HWTACACS scheme
Enter system view
Create a HWTACACS
scheme and enter
HWTACACS view
Caution:
The system supports up to 16 HWTACACS schemes. You can only delete the schemes
that are not being used.
1.5.2 Configuring HWTACACS Authentication Servers
Table 1-24 Configure HWTACACS authentication servers
Enter system view
Create a HWTACACS
scheme and enter its view
To do...
system-view
hwtacacs scheme
hwtacacs-scheme-name
To do...
system-view
hwtacacs scheme
hwtacacs-scheme-name
Chapter 1 AAA & RADIUS & HWTACACS
Use the command...
Use the command...
1-33
Configuration
Remarks
—
Required
By default, no
HWTACACS scheme
exists.
Remarks
—
Required
By default, no
HWTACACS scheme
exists.