Hwtacacs Configuration Task List; Creating An Hwtacacs Scheme; Configuring Tacacs Authentication Servers - H3C S3100 Series Operation Manual

HWTACACS Configuration Task List

Table 2-24 HWTACACS configuration tasks
Configuring the
TACACS client
Configuring the
TACACS server

Creating an HWTACACS Scheme

The HWTACACS protocol configuration is performed on a scheme basis. Therefore, you must create
an HWTACACS scheme and enter HWTACACS view before performing other configuration tasks.
Table 2-25 Create an HWTACACS scheme
Operation
Enter system view
Create an HWTACACS
scheme and enter its view
The system supports up to 16 HWTACACS schemes. You can delete an HWTACACS scheme only
when it is not referenced.

Configuring TACACS Authentication Servers

Table 2-26 Configure TACACS authentication servers
Operation
Enter system view
Create an HWTACACS
scheme and enter its view
Task
Creating an HWTACACS Scheme
Configuring TACACS Authentication Servers
Configuring TACACS Authorization Servers
Configuring TACACS Accounting Servers
Configuring Shared Keys for RADIUS Messages
Configuring the Attributes of Data to be Sent to TACACS
Servers
Configuring the Timers Regarding TACACS Servers
Refer to the configuration of TACACS servers.
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
2-25
Remarks
Required
Required
Required
Optional
Optional
Optional
Optional
—
Remarks
—
Required
By default, no HWTACACS
scheme exists.
Remarks
—
Required
By default, no HWTACACS
scheme exists.