Command Reference Guide
ip ospf authentication
Use the ip ospf authentication command to authenticate an interface that is performing open shortest path
first (OSPF) authentication. Use the no form of this command to return to the default setting. Variations of
this command include:
ip ospf authentication
ip ospf authentication message-digest
ip ospf authentication null
Syntax Description
message-digest
null
Default Values
By default, this is set to null (meaning no authentication is used).
Command History
Release 9.1
Usage Examples
The following example specifies that no authentication will be used on the high level data link control
(HDLC) interface:
(config)#interface hdlc 1
(config-hdlc 1)#ip ospf authentication null
60000CRG0-35E
Optional. Select message-digest authentication type.
Optional. Specifies that no authentication be used.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
HDLC Interface Command Set
2359