Reset Acl Counter; Rule (Advanced Acl View) - H3C S5120-SI Series Command Reference Manual

[Sysname-GigabitEtherhet1/0/1] packet-filter 2001 inbound
# Apply Ethernet frame header ACL 4001 to the inbound direction of interface GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEtherhet1/0/1] packet-filter 4001 inbound

reset acl counter

Syntax
reset acl counter { acl-number | all | name acl-name }
View
User view
Default Level
2: System level
Parameters
acl-number: Specifies an ACL by its number:
2000 to 2999 for basic ACLs
3000 to 3999 for advanced ACLs
4000 to 4999 for Ethernet frame header ACLs
all: Clears statistics for all ACLs.
name acl-name: Specifies an ACL by its name. The acl-name argument takes a case insensitive string
of 1 to 32 characters. It must start with an English letter.
Description
Use the reset acl counter command to clear statistics for the specified or all ACLs.
Related commands: display acl.
Examples
# Clear statistics on ACL 2001.
<Sysname> reset acl counter 2001
# Clear statistics on ACL flow.
<Sysname> reset acl counter name flow

rule (advanced ACL view)

Syntax
rule [ rule-id ] { deny | permit } protocol [ { established | { ack ack-value | fin fin-value | psh psh-value
| rst rst-value | syn syn-value | urg urg-value } * } | destination { dest-addr dest-wildcard | any } |
destination-port operator port1 [ port2 ] | dscp dscp | fragment | icmp-type { icmp-type icmp-code |
icmp-message } | logging | precedence precedence | reflective | source { sour-addr sour-wildcard |
any } | source-port operator port1 [ port2 ] | time-range time-range-name | tos tos ] *
1-8