Ppp User Accept-Format Imsi-Sn Split; Ppp User Attach-Format Imsi-Sn Split - H3C MSR810 Command Reference Manual

[Sysname] interface virtual-ppp 1
[Sysname-Virtual-PPP1] ppp lcp sn string sn1
Related commands
ppp lcp sn accept
ppp lcp sn request

ppp user accept-format imsi-sn split

Use ppp user accept-format imsi-sn split to configure the separator for the received
authentication information.
Use undo ppp user accept-format to restore the default.
Syntax
ppp user accept-format imsi-sn split splitchart
undo ppp user accept-format
Default
No separator is configured for the received authentication information.
Views
VT interface view
Predefined user roles
network-admin
Parameters
splitchart: Specifies the separator. The separator contains one character, and it can be a letter, digit,
or sign such as the percent sign (%), pound sign (#), and at sign (@).
Usage guidelines
By default, the authentication information contains only the client username. If you include the IMSI
or SN information in the authentication information, you must configure the separator to separate
different types of information. For example, if you specify the at sign (@) as the separator, the
information imsiinfo@sninfo@username will be split into imsiinfo, sninfo, and username.
If no IMSI/SN information is received from the peer during the authentication process, t he IMSI/SN
information split from the received authentication information is used.
Examples
# Configure the pound sign (#) as the separator for the authentication information.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp user accept-format imsi-sn split #
Related commands

ppp user attach-format imsi-sn split

ppp user replace
ppp user attach-format imsi-sn split
Use ppp user attach-format imsi-sn split to configure the separator for the sent authentication
information.
118