Configuring Pap Authentication - H3C SR6600 Configuration Manual

This document only discusses local authentication. For more information about remote AAA
authentication, see AAA in the Security Configuration Guide.

Configuring PAP Authentication

Configuring the authenticator
Follow these steps to configure the authenticator:
To do...
Enter system view
Enter interface view
Configure the local router
to authenticate the peer
using PAP
Quit to system view
Create
account
authenticatee and enter
local user view
Configure a password for
the local user
Configure the service type
of the local user as PPP
Quit to system view
Create an ISP domain or
enter
domain view
Configure to authenticate
domain users locally
For more information about local user and domain configuration, see AAA in the Security Configuration
Guide.
Configuring the authenticatee
Follow these steps to configure the authenticatee:
To do...
Enter system view
Enter interface view
a local user
for the
an existing ISP
Use the command...
system-view
interface interface-type
interface-number
ppp authentication-mode
pap [ [ call-in ] domain
isp-name ]
quit
local-user username
{
password cipher
simple } password
service-type ppp
quit
domain isp-name
authentication ppp local
Use the command...
system-view
interface interface-type
interface-number
2-32
Remarks
—
—
Required
By default,
authentication
performed.
—
Required
|
Required
Required
—
Optional
Optional
Remarks
—
—
PPP
is not