Display Hwtacacs - H3C s3100 series Command Manual

System View: return to User View with Ctrl+Z.
[Sysname] hwtacacs scheme hwt1
[Sysname- hwtacacs-hwt1] data-flow-format data kilo-byte
[Sysname- hwtacacs-hwt1] data-flow-format packet kilo-packet

display hwtacacs

Syntax
display hwtacacs [ hwtacacs-scheme-name [ statistics ] ]
View
Any view
Parameters
hwtacacs-scheme-name: HWTACACS scheme name, a string of 1 to 32 characters. This name is
case-insensitive. If this argument is not specified, the system displays information about all
HWTACACS schemes.
statistics: Displays statistics about one or all HWTACACS schemes.
Description
Use the display hwtacacs command to display configuration or statistics information of one specified
or all HWTACACS schemes.
Related commands: hwtacacs scheme.
Examples
# Display configuration information of HWTACACS scheme ht1.
<Sysname> display hwtacacs ht1
--------------------------------------------------------------------
template name
Primary-authentication-server
Primary-authorization-server
Primary-accounting-server
Secondary-authentication-server : 0.0.0.0:0
Secondary-authorization-server
Secondary-accounting-server
Current-authentication-server
Current-authorization-server
Current-accounting-server
Source-IP-address
key authentication
key authorization
key accounting
Quiet-interval(min)
Response-timeout-Interval(sec)
Realtime-accouting-Interval(min): 12
Stop-acct-PKT resending times
Domain-included
: ht1
: 172.31.1.11:49
: 172.31.1.11:49
: 172.31.1.11:49
: 0.0.0.0:0
: 0.0.0.0:0
: 172.31.1.11:49
: 172.31.1.11:49
: 172.31.1.11:49
: 0.0.0.0
: 790131
: 790131
: 790131
: 5
: 5
: 100
: No
1-67
HWTACACS-server