Display Bgp Routing-Table Dampening Parameter - H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Table 5-7 Description on the fields of the display bgp routing-table dampened
command
From
Reuse
Refer to

5.1.26 display bgp routing-table dampening parameter

Syntax
display bgp routing-table dampening parameter
View
Any view
Parameters
None
Description
Use the display bgp routing-table dampening parameter command to display BGP
route dampening parameters.
Related commands: dampening.
Examples
# Display BGP route dampening parameters.
<Sysname> display bgp routing-table dampening parameter
Maximum Suppress Time(in second) : 3069
Ceiling Value
Reuse Value
HalfLife Time(in
Suppress-Limit
Table 5-8 Description on the fields of the display bgp routing-table dampening
parameter command
Maximum Suppress Time
Ceiling Value
Reuse Value
Field
IP address from which the route was received
Reuse time of the route
Table 5-6 for description on the other fields above.
second)
Field
Chapter 5 BGP Configuration Commands
Description
: 16000
: 750
: 900
: 2000
Maximum Suppress Time
Upper limit of penalty value
Limit for a route to be desuppressed
5-25
Description