Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
[Sysname-Vlan-interface10] isis silent
4.1.33 isis small-hello
Syntax
isis small-hello
undo isis small-hello
View
Interface view
Parameters
None
Description
Use the isis small-hello command to configure the interface to send small Hello
packets without padding field.
Use the undo isis small-hello command to disable the feature.
An interface sends standard Hello packets by default.
Note:
This command is not available in loopback interface view.
Examples
# Configure VLAN-interface 10 to send small Hello packets.
<Sysname> system-view
[Sysname] interface vlan-interface10
[Sysname-Vlan-interface10] isis small-hello
4.1.34 isis timer csnp
Syntax
isis timer csnp seconds [ level-1 | level-2 ]
undo isis timer csnp [ level-1 | level-2 ]
View
Interface view
Chapter 4 IS-IS Configuration Commands
4-37