Display Ospf Lsdb - H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Table 3-6 Description on the fields of the display ospf interface command
Field
Area
IP address
Type
State
Cost
Pri
DR
BDR

3.1.16 display ospf lsdb

Syntax
display ospf [ process-id ] lsdb [ brief | [ { ase | router | network | summary | asbr |
nssa | opaque-link | opaque-area | opaque-as } [ link-state-id ] ] [ originate-router
advertising-router-id | self-originate ] ]
View
Any view
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
brief: Displays brief LSDB information.
ase: Displays Type-5 LSA (AS External LSA) information in the LSDB.
router: Displays Type-1 LSA (Router LSA) information in the LSDB.
network: Displays Type-2 LSA (Network LSA) information in the LSDB.
summary: Displays Type-3 LSA (Network Summary LSA) information in the LSDB.
asbr: Displays Type-4 LSA (ASBR Summary LSA) information in the LSDB.
nssa: Displays Type-7 LSA (NSSA External LSA) information in the LSDB.
opaque-link: Displays Type-9 LSA (Opaque-link LSA) information in the LSDB.
opaque-area: Displays Type-10 LSA (Opaque-area LSA) information in the LSDB.
opaque-as: Displays Type-11 LSA (Opaque-AS LSA) information in the LSDB.
link-state-id: Link state ID, in the IP address format.
Area ID of the interface
Interface IP address (regardless of whether TE is enabled or not)
Interface network type: PTP, PTMP, Broadcast, or NBMA
Interface state defined by interface state machine: DOWN,
Waiting, p-2-p, DR, BDR, or DROther
Interface cost
Router priority
The DR on the interface's network segment
The BDR on the interface's network segment
3-19
Chapter 3 OSPF Configuration Commands
Description