Display Isis Lsdb - H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
MI
Resource Name
MinVal
MaxVal
CurrVal
ISIS Core License Values
Max Processes Resource
Max Paths Resource
Max IPv4 Rt Resource
Max IPv6 Rt Resource

4.1.10 display isis lsdb

Syntax
display isis lsdb [ [ l1 | l2 | level-1 | level-2 ] | [ lsp-id LSPID | lsp-name lspname ] |
local | verbose ] * [ process-id ]
View
Any view
Parameters
l1, level-1: Specifies level-1 LSDB.
l2, level-2: Specifies level-2 LSDB.
LSPID: LSP ID, in the form of sysid. Pseudo ID-fragment num.
lspname: LSP name, in the form of Symbolic name.[Pseudo ID]-fragment num.
local: Displays LSP information generated locally.
verbose: Displays LSDB detailed information.
process-id: IS-IS process ID, in the range of 1 to 65535.
Note:
If no level is specified, then both Level-1 and Level-2 (or Level-1-2) link state databases
are displayed by default.
Field
Multi-instance
Resource name
Minimum value
Maximum value
Current value
License values of ISIS Core
Maximum number of processes supported
Maximum equal cost paths
Maximum IPv4 routes supported
Maximum IPv6 routes supported
4-12
Chapter 4 IS-IS Configuration Commands
Description