H3C S7500E Series Command Manual page 449

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
BGP Local router ID is 10.10.10.1
Status codes: * - valid, > - best, d - damped,
Network
*> 40.40.40.0/24
Table 5-6 Description on the fields of the display bgp routing command
Field
Total Number
of Routes
BGP Local
router ID
Status codes
Origin
Network
Next Hop
MED
LocPrf
PrefVal
Path
PrefVal
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
20.20.20.1
Total Number of Routes
BGP Local router ID
Status codes:
* – valid
> – best
d – damped
h – history
i – internal (IGP)
s – summary suppressed (suppressed)
S – Stale
i – IGP (originated in the AS)
e – EGP (learned through EGP)
? – incomplete (learned by other means)
Destination network address
Next hop IP address
MULTI_EXIT_DISC attribute
Local preference value
Preferred value of the route
AS_PATH attribute, recording the ASs the packet has passed to
avoid routing loops
Preferred value
5-20
Chapter 5 BGP Configuration Commands
MED LocPrf
Description
PrefVal Path/Ogn
0 200 300i