H3C S7500E Series Command Manual page 418

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
undo lsp-length receive
View
IS-IS view
Parameters
size: Maximum size of received LSPs, in the range of 512 to 16384 bytes.
Description
Use the lsp-length receive command to configure the maximum size of received
LSPs.
Use the undo lsp-length receive command to restore the default.
By default, the maximum size of received LSPs is 1497 bytes.
Examples
# Configure the maximum size of received LSPs.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] lsp-length receive 1024
4.1.47 maximum load-balancing
Syntax
maximum load-balancing number
undo maximum load-balancing
View
IS-IS view
Parameters
number: Maximum number of equal-cost load balanced routes, in the range 1 to 4.
Description
Use the maximum load-balancing command to configure the maximum number of
equal-cost load balanced routes.
Use the undo maximum load-balancing command to restore the default.
By default, the maximum number of equal-cost load balanced routes is 4.
Examples
# Configure the maximum number of equal-cost load-balanced routes as 2.
Chapter 4 IS-IS Configuration Commands
4-48