Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
HalfLife Time
Suppress-Limit
5.1.27 display bgp routing-table different-origin-as
Syntax
display bgp routing-table different-origin-as
View
Any view
Parameters
None
Description
Use the display bgp routing-table different-origin-as command to display BGP
routes originating from different autonomous systems.
Examples
# Display BGP routes originating from different ASs.
<Sysname> display bgp routing-table different-origin-as
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
Network
*>
55.0.0.0
*
Refer to
5.1.28 display bgp routing-table flap-info
Syntax
display bgp routing-table flap-info [ regular-expression as-regular-expression |
as-path-acl
[ longer-match ] ] ]
Field
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
NextHop
12.1.1.1
14.1.1.2
Table 5-6
for description on the fields above.
as-path-acl-number
Chapter 5 BGP Configuration Commands
Half-life time of active routes
Limit for a route to be suppressed
i - internal, s - suppressed, S - Stale
MED
0
0
|
ip-address
[
5-26
Description
LocPrf
PrefVal Path/Ogn
0
100?
0
300?
{
mask
|
mask-length
}