H3C S7500E Series Command Manual page 336

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
View
Any view
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
interface interface-type interface-number: Displays OSPF routing information
advertised via the interface.
nexthop nexthop-address: Displays OSPF routing information with the specified next
hop.
Description
Use the display ospf routing command to display OSPF routing information.
If no OSPF process is specified, the routing information of all OSPF processes is
displayed.
Examples
# Display OSPF routing information.
<Sysname> display ospf routing
Routing for Network
Destination
192.168.1.0/24
172.16.0.0/16
Total Nets: 2
Intra Area: 1
Table 3-15 Description on the fields of the display ospf routing command
Destination
Cost
Type
NextHop
AdvRouter
Area
OSPF Process 1 with Router ID 192.168.1.2
Routing Tables
Cost Type
1562 stub
1563 Inter
Inter Area: 1
Field
Destination network
Cost to destination
Route type: intra-area, transit, stub, inter-area, type1
external, type2 external.
Next hop address
Advertising router
Area ID
Chapter 3 OSPF Configuration Commands
NextHop
192.168.1.2
192.168.1.1
ASE: 0 NSSA: 0
Description
3-29
AdvRouter Area
192.168.1.2 0.0.0.0
192.168.1.1 0.0.0.0