Display Isis Peer - H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Description
Use the display isis name-table command to display the host name-to-system ID
mapping table.
Examples
# Configure a name for the local IS-IS system.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] is-name RUTA
# Configure a static mapping for the remote IS-IS system (0000.0000.0041).
[Sysname-isis-1] is-name map 0000.0000.0041 RUTB
# Display the IS-IS host name-to-system ID mapping table.
[Sysname-isis-1] display isis name-table
---------------------------------------------------------------
System ID
6789.0000.0001
0000.0000.0041
Table 4-6 Description on the fields of the display isis name-table command
System ID
Hostname
Type

4.1.13 display isis peer

Syntax
display isis peer [ verbose ] [ process-id ]
View
Any view
Parameters
verbose: When this parameter is used, the area address advertised in a neighbor's
Hello packet will be displayed. Otherwise the system displays only the summary
information.
process-id: Specifies an IS-IS process ID, in the range of 1 to 65535.
Name table information for ISIS(1)
Hostname
RUTA
RUTB
Field
System ID
Hostname name of the system ID
Mapping type of system ID to host name (static or dynamic)
Chapter 4 IS-IS Configuration Commands
Description
4-15
Type
DYNAMIC
STATIC