H3C S7500E Series Command Manual page 331

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
GR State
State
Mode
Priority
DR
BDR
MTU
Dead timer due in 40 sec
Neighbor is up for 00:12:59
Authentication Sequence
Neighbor state change
count
# Display brief OSPF neighbor information.
<Sysname> display ospf peer
Area: 0.0.0.1
Router ID
192.168.0.136
Table 3-11 Description on the fields of the display ospf peer command
Field
Area
Router ID
Address
Pri
Dead time(s)
Interface
State
Field
GR state
Neighbor state: Down, Init, Attempt, 2-Way, Exstart,
Exchange, Loading or Full
Neighbor mode for DD exchange: master or slave
Router priority
The DR on the interface's network segment
The BDR on the interface's network segment
Interface MTU
Dead timer times out in 40 seconds
The neighbor has been up for 00:12:59
Authentication sequence number
Count of neighbor state changes
OSPF Process 1 with Router ID 192.168.0.138
Neighbor Brief Information
Address
192.168.0.136
Neighbor area
Neighbor router ID
Neighbor interface address
Router priority
Dead interval remained
Interface connected to the neighbor
Neighbor state: Down, Init, Attempt, 2-Way, Exstart, Exchange,
Loading or Full
Chapter 3 OSPF Configuration Commands
Description
Pri Dead-Time Interface
1 37 Vlan1
Description
3-24
State
Full/BDR