Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
View
Any view
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
Description
Use the display ospf nexthop command to display OSPF next hop information.
If no OSPF process is specified, the next hop information of all OSPF processes is
displayed.
Examples
# Display OSPF next hop information.
<Sysname> display ospf nexthop
Next Hops:
Address
----------------------------------------------------------------
192.168.0.1
192.168.0.2
192.168.1.1
Table 3-9 Description on the fields of the display ospf nexthop command
Next hops
Address
Refcount
IntfAddr
Intf Name
3.1.18 display ospf peer
Syntax
display ospf [ process-id ] peer [ verbose | [ interface-type interface-number ]
[ neighbor-id ] ]
OSPF Process 1 with Router ID 192.168.0.1
Routing Nexthop Information
Refcount
1
1
1
Field
Information about Next hops
Next hop address
Reference count, namely, routes that reference the next hop
Outbound interface address
Outbound interface name
Chapter 3 OSPF Configuration Commands
IntfAddr
Intf Name
192.168.0.1
Vlan-interface1
192.168.0.1
Vlan-interface1
192.168.1.1
Vlan-interface10
Description
3-22