H3C S7500E Series Command Manual page 476

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
5.1.54 peer ignore
Syntax
peer { group-name | ip-address } ignore
undo peer { group-name | ip-address } ignore
View
BGP view
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Description
Use the peer ignore command to disable session establishment with a peer or peer
group.
Use the undo peer ignore command to remove the configuration.
By default, session establishment with a peer or peer group is allowed.
After the peer ignore command is executed, the system disables the session with the
specified peer or peer group and clears all the related routing information. For a peer
group, this means all sessions with the peer group will be tore down.
Examples
# In BGP view, disable session establishment with peer 10.10.10.10.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 10.10.10.10 ignore
5.1.55 peer ip-prefix
Syntax
peer { group-name | ip-address } ip-prefix ip-prefix-name { export | import }
undo peer { group-name | ip-address } ip-prefix { export | import }
View
BGP view
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Chapter 5 BGP Configuration Commands
5-47