Display Isis Name-Table - H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Description
Use the display isis mesh-group command to display IS-IS mesh-group.
Examples
# Configure VLAN-interface 10 and VLAN-interface 20 on a switch to belong to
mesh-group 100. (The process to establish VLAN-interface 10 and VLAN-interface 20
is omitted.)
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis mesh-group 100
[Sysname-Vlan-interface10] quit
[Sysname] interface vlan-interface 20
[Sysname-Vlan-interface20] isis mesh-group 100
# Display the configuration information of IS-IS mesh-group.
[Sysname-Vlan-interface20] display isis mesh-group
Interface
Vlan10
Vlan20
Table 4-5 Description on the fields of the display isis mesh-group command
Interface
Status

4.1.12 display isis name-table

Syntax
display isis name-table [ process-id ]
View
Any view
Parameters
process-id: IS-IS process ID, in the range of 1 to 65535.
Mesh Group information for ISIS(1)
----------------------------------
Status
100
100
Field
4-14
Chapter 4 IS-IS Configuration Commands
Description
Interface name
Mesh-group number of the interface