H3C S7500E Series Command Manual page 386

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Description
Use the display isis peer command to display IS-IS neighbor information.
Besides all the information displayed using the display isis peer command, the
display isis peer verbose command displays neighbor area address, hold time of Up
state and direct interface's IP address.
Examples
# Display detailed IS-IS neighbor information.
<Sysname> display isis peer verbose
System Id: 1010.1020.1031
Interface: Vlan-interface1
State: Up
Area Address(es):10.0001
Peer IP Address(es): 192.168.0.156
Uptime: 00:05:45
Adj Protocol:
System Id: 1010.1020.1031
Interface: Vlan-interface1
State: Up
Area Address(es):10.0001
Peer IP Address(es): 192.168.0.156
Uptime: 00:05:45
Adj Protocol:
Table 4-7 Description on the fields of the display isis peer command
System Id
Interface
Circuit Id
State
HoldTime
Type
PRI
Area Address(es)
Peer information for ISIS(1)
----------------------------
HoldTime: 7s
IPV4
HoldTime: 7s
IPV4
Field
System ID
Interface connecting to the neighbor
Circuit ID
State
Holdtime
Type of the neighbor
DIS Priority
The neighbor's area address
4-16
Chapter 4 IS-IS Configuration Commands
Circuit Id: 1010.1020.1031.01
Type: L1(L1L2)
Circuit Id: 1010.1020.1031.01
Type: L2(L1L2)
Description
PRI: 64
PRI: 64