Voice Vlan Mode Auto - H3C S7500E Series Command Manual

Command Manual – VLAN
H3C S7500E Series Ethernet Switches
0001-e300-0000
0003-6b00-0000
0004-0d00-0000
0060-b900-0000
00d0-1e00-0000
00e0-7500-0000
00e0-bb00-0000
1234-1200-0000
# Disable voice packets of Phone A from passing through the voice VLAN.
<Sysname> system-view
[Sysname] undo voice vlan mac-address 1234-1200-0000

3.1.7 voice vlan mode auto

Syntax
voice vlan mode auto
undo voice vlan mode auto
View
Ethernet port view
Parameters
None
Description
Use the voice vlan mode auto command to configure the voice VLAN working mode
on a port to be automatic.
Use the undo voice vlan mode auto command to configure the voice VLAN working
mode on a port to be manual.
By default, the voice VLAN working mode is automatic.
The voice VLAN working mode of a port is independent of those of other ports.
Note that: if the interface is enabled with voice VLAN in manual mode, you need to add
the port to the voice VLAN manually to validate the voice VLAN.
Examples
# Configure the voice VLAN working mode on Ethernet 2/0/1 as manual.
<Sysname> system-view
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] undo voice vlan mode auto
ffff-ff00-0000 Siemens phone
ffff-ff00-0000 Cisco phone
ffff-ff00-0000 Avaya phone
ffff-ff00-0000 Philips/NEC phone
ffff-ff00-0000 Pingtel phone
ffff-ff00-0000 Polycom phone
ffff-ff00-0000 3com phone
ffff-ff00-0000 PhoneA
3-7
Chapter 3 Voice VLAN Configuration Commands