Voice Vlan - H3C S7500E Series Command Manual

Command Manual – VLAN
H3C S7500E Series Ethernet Switches
Table 3-2 Description on the fields of the display voice vlan state command
Voice VLAN status
Voice VLAN ID
Voice VLAN security mode
Voice VLAN aging time
Current voice vlan enabled port
and its mode
PORT
MODE

3.1.3 voice vlan

Syntax
voice vlan vlan-id enable
undo voice vlan enable
View
System view
Parameters
vlan-id: ID of the VLAN to be enabled with the voice VLAN feature, in the range 2 to
4094.
Description
Use the voice vlan command to enable the voice VLAN feature globally.
Use the undo voice vlan enable command to disable the voice VLAN feature globally.
At one particular moment, only one VLAN of a certain device can have the voice
VLAN feature enabled.
Ensure that a VLAN exists before enabling its voice VLAN feature and that it is not
VLAN 1. Otherwise, the configurations will fail.
If a VLAN to be deleted has the voice VLAN feature enabled, you need to disable
the voice VLAN feature first before deleting the VLAN.
Related commands: display voice vlan state.
Field
3-3
Chapter 3 Voice VLAN Configuration Commands
Description
The current voice VLAN status, that is, whether
it is enabled or disabled.
ID of a voice VLAN
Security mode of a voice VLAN
Aging time of a voice VLAN
The port that is currently enabled with the voice
VLAN feature and its working mode
port ID
Voice VLAN working mode: manual or
automatic.