H3C S7500E Series Command Manual page 67

Command Manual – VLAN
H3C S7500E Series Ethernet Switches
Table 1-5 Description on the fields of the display ip-subnet-vlan vlan command
VLAN ID
Subnet Index
IP Address
Subnet Mask
1.4.3 ip-subnet-vlan
Syntax
ip-subnet-vlan [ ip-subnet-index ] ip ip-address [ mask ]
undo ip-subnet-vlan { ip-subnet-index [ to ip-subnet-end ] | all }
View
VLAN view
Parameters
ip-subnet-index: IP subnet Index, in the range of 0 to 11. This value can be configured
by users, or automatically numbered by system based on the order in which the IP
subnet or IP address is associated with the VLAN.
ip ip-address [mask]: Specifies the source IP address or network address based on
which the subnet-based VLANs are classified, in dotted decimal notation. The mask
argument is the subnet mask of the source IP address or network address, in dotted
decimal notation with a default value of 255.255.255.0.
to: Specifies an IP subnet Index range.
ip-subnet-end: The last index value of the IP subnet, in the range of 0 to 11, must be
greater than or equal to the ip-subnet-index value.
all: Removes all the associations between the VLAN and the specified IP subnets or IP
addresses.
Description
Use the ip-subnet-vlan command to associate the current VLAN with a specified IP
subnet or IP address.
Use the undo ip-subnet-vlan command to delete the association.
Note that the IP subnet or IP address cannot be a multicast network segment or a
multicast address.
Related commands: display ip-subnet-vlan vlan.
Field
VLAN ID
Subnet Index
IP address of the subnet (can be an IP address or a network
address)
Mask of the IP subnet
Chapter 1 VLAN Configuration Commands
Description
1-22