Display Gvrp Status; Display Gvrp Vlan-Operation Interface - H3C S7500E Series Command Manual

Command Manual – VLAN
H3C S7500E Series Ethernet Switches

4.2.4 display gvrp status

Syntax
display gvrp status
View
Any view
Parameters
None
Description
Use the display gvrp status command to display the global enable/disable state of
GVRP.
Examples
# Display the global GVRP enable/disable state.
<Sysname> display gvrp status

4.2.5 display gvrp vlan-operation interface

Syntax
display gvrp vlan-operation interface interface-type interface-number
View
Any view
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display gvrp vlan-operation interface command to display the information
about dynamic VLAN operations performed on a port.
Examples
# Display the information about dynamic VLAN operations performed on Ethernet
2/0/1.
<Sysname> display gvrp vlan-operation interface ethernet 2/0/1
GVRP is enabled
Dynamic VLAN operations on port Ethernet2/0/1
Chapter 4 GARP/GVRP Configuration Commands
4-8