H3C S7500E Series Command Manual page 265

Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
Description
Use the display ipv6 routing-table verbose command to display detailed information
about all active and inactive routes, including the statistics of the entire routing table
and information for each route.
Examples
# Display detailed information about all active and inactive routes.
<Sysname> display ipv6 routing-table verbose
Routing Table :
Destination
NextHop
RelayNextHop : ::
Neighbour
Interface
State
Tunnel ID
Age
Table 1-11 Description on the fields of the display ipv6 routing-table verbose
command
Destination
PrefixLength
Nexthop
Preference
RelayNextHop
Tag
Neighbour
ProcessID
Interface
Protocol
State
Cost
Tunnel ID
Destinations : 1
: ::1
: ::1
: ::
: InLoopBack0
: Active NoAdv
: 0x0
: 22161sec
Field
Destination IPv6 address
Prefix length of the address
Next hop
Routing preference
Relay next hop
Tag of the route
Neighbor address
Process ID
Outbound interface
Routing protocol
State of the route, Active, Inactive, Adv (advertised), or
NoAdv (not advertised)
Cost of the route
Tunnel ID
Chapter 1 Routing Overview Commands
Routes : 1
Description
1-25
PrefixLength : 128
Preference : 0
Tag : 0H
ProcessID : 0
Protocol : Direct
Cost : 0
Label : NULL