Display Ip Socket - H3C S7500E Series Command Manual

Command Manual – IP Addressing and Performance
H3C S7500E Series Ethernet Switches
Table 2-3 Description on the fields of the display icmp statistics command
bad formats
bad checksum
echo
destination unreachable
source quench
redirects
echo reply
parameter problem
timestamp
information request
mask requests
mask replies
information reply
time exceeded

2.1.5 display ip socket

Syntax
display ip socket [ socktype sock-type ] [ task-id socket-id ] [ slot slot-number ]
View
Any view
Parameters
socktype sock-type: Displays the socket information of this type. The sock type is in
the range 1 to 3, corresponding to TCP, UDP and raw IP respectively.
task-id: Displays the socket information of this task. Task ID is in the range 1 to 100.
socket-id: Displays the information of the socket. Socket ID is in the range 0 to 3072.
slot-number: Displays the socket information of the slot.
Description
Use the display ip socket command to display socket information.
Field
Number of input wrong format packets
Number of input wrong checksum packets
Number of input/output echo packets
Number of input/output destination unreachable packets
Number of input/output source quench packets
Number of input/output redirection packets
Number of input/output replies
Number of input/output parameter problem packets
Number of input/output time stamp packets
Number of input information request packets
Number of input/output mask requests
Number of input/output mask replies
Number of output information reply packets
Number of input/output expiration packets
Chapter 2 IP Performance Configuration
Description
2-6
Commands