H3C S7500E Series Command Manual page 80

Command Manual – VLAN
H3C S7500E Series Ethernet Switches
description text: Specifies a string that describes the OUI address. The string is of 1 to
30 characters and is case sensitive.
oui: Deletes an OUI address that is in the format H-H-H, such as 1234-1200-0000,
which is the logic AND result of mac-addr and oui-mask. Using the display voice vlan
oui command can display OUI address information. The OUI address cannot be a
broadcast, multicast or address of all 0s or all fs.
Description
Use the voice vlan mac-address command to make a specified OUI address
identified by the voice VLAN.
Use the undo voice vlan mac-address command to remove an OUI address from
being identified by the voice VLAN.
A maximum of 16 OUI addresses can be supported by the system.
By default, default OUI addresses, which can be removed or then added, as illustrated
in the following table.
Table 3-3 Default OUI addresses
Number
1
2
3
4
5
6
7
Related commands: display voice vlan oui.
Examples
# Configure the OUI address as 1234-1234-1234, the mask as ffff-ff00-0000, and the
descriptive string as phone A, that is, voice packets from Phone A with source MAC
address being 1234-1234-1234 can pass through the voice VLAN.
<Sysname> system-view
[Sysname]
description PhoneA
# Display OUI address information.
<Sysname> display voice vlan oui
Oui Address
0001-e300-0000
0003-6b00-0000
0004-0d00-0000
0060-b900-0000
00d0-1e00-0000
00e0-7500-0000
00e0-bb00-0000
voice vlan mac-address
Mask
Chapter 3 Voice VLAN Configuration Commands
OUI
1234-1234-1234
Description
3-6
Description
Siemens phone
Cisco phone
Avaya phone
Philips/NEC phone
Pingtel phone
Polycom phone
3com phone
mask ffff-ff00-0000