Link-Aggregation Group Description; Link-Aggregation Group Mode - H3C S7500E Series Command Manual

Command Manual – Link Aggregation
H3C S7500E Series Ethernet Switches
Examples
# Assign LACP priority 64 to the local system.
<Sysname> system-view
[Sysname] lacp system-priority 64

1.1.8 link-aggregation group description

Syntax
link-aggregation group agg-id description agg-name
undo link-aggregation group agg-id description
View
System view
Parameters
agg-id: Link aggregation group ID.
agg-name: Link aggregation group name, a string of 1 to 32 characters.
Description
Use the link-aggregation group description command to configure a name for the
specified link aggregation group.
Use the undo link-aggregation group description command to remove the name of
the specified link aggregation group.
Related commands: display link-aggregation verbose.
Examples
# Name link aggregation group 22 as abc.
<Sysname> system-view
[Sysname] link-aggregation group 22 description abc

1.1.9 link-aggregation group mode

Syntax
link-aggregation group agg-id mode { manual | static }
undo link-aggregation group agg-id
View
System view
Chapter 1 Link Aggregation Configuration Commands
1-9