Display Loopback-Detection - H3C S7500E Series Command Manual

Command Manual – Port Correlation Configuration
H3C S7500E Series Ethernet Switches
Last 300 seconds input
Last 300 seconds output
Input (total):
Input (normal):
Input:
Output (total):
Output (normal):
Output:

1.1.5 display loopback-detection

Syntax
display loopback-detection
View
Any view
Parameters
None
Field
Average input rate over the last 300 seconds,;
among which:
Average output rate over the last 300 seconds,
among which:
Error statistics on the port inbound and outbound
packets, underscore indicates that the
corresponding entry is invalid
Chapter 1 Ethernet Port Configuration
Description
packets/sec indicates the average input rate in
terms of the average number of the packets
received per second.
bytes/sec indicates the average input rate in
terms of the average number of bytes received
per second.
x% indicates the percentage of this average input
rate to the total bandwidth, where "-" indicates
that the rate is greater than the maximum value
that can be displayed.
packets/sec indicates the average output rate in
terms of the average number of the packets
output per second.
bytes/sec indicates the average output rate in
terms of the average number of bytes output per
second.
x% indicates the percentage of this average
output rate to the total bandwidth, where "-"
indicates that the rate is greater than the
maximum value that can be displayed.
1-8
Commands