H3C S7500E Series Command Manual page 175

Command Manual – Link Aggregation
H3C S7500E Series Ethernet Switches
Table 1-4 Description on the fields of the display link-aggregation verbose
command
Loadsharing Type
Flags
Aggregation ID
AggregationType
Aggregation
Description
System ID
Port Status
Local:
Port, Status, Priority,
Oper-key, Flag
Remote:
Actor, Partner, Priority,
Oper-key, SystemID,
Flag
Field
Load sharing type, either shar for load sharing or NonS for
non-load sharing
One-octet LACP flags field indicates the actor state
variables for the port. From the least to the most significant
bit, they are represented by A through H as follows:
A indicates the enabling/disabling state of LACP, 1 for
enabled and 0 for disabled
B indicates the timeout control value, 1 for short
timeout, and 0 for long timeout
C indicates whether the sending system considers this
link to be aggregatable, 1 for true, and 0 for false
D indicates whether the sending system considers that
this link is synchronized, 1 for true, and 0 for false
E indicates whether the sending system considers that
collection of incoming frames is enabled on the link, 1
for true and 0 for false
F indicates whether the sending system considers that
distribution of outgoing frames is enabled on the link, 1
for true and 0 for false
G indicates whether the receive state machine of the
sending system is using default operational partner
information, 1 for true and 0 for false
H indicates whether the receive state machine of the
sending system is in the expired state, 1 for true and 0
for false
If a flag bit is set to 1, the corresponding English letter that
otherwise is not output displays.
Link aggregation group ID
Link aggregation type: manual or static LACP.
Link aggregation group name
Local system ID
Port state in a link aggregation group: selected or
unselected
Other information about the local end, including member
ports, port state, port LACP priority, operational key, and
flags
Detailed information about the remote end, including
corresponding local port, port ID, port LACP priority,
operational key, system ID, and flags
Chapter 1 Link Aggregation Configuration Commands
Description
1-7