Display Ipv6 Routing-Table Ipv6-Address - H3C S7500E Series Command Manual

Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
Parameters
acl6-number: Basic IPv6 ACL number, in the range 2000 to 2999.
verbose: Displays both active and inactive verbose routing information permitted by
the ACL. Without this keyword, only brief active routing information is displayed.
Description
Use the display ipv6 routing-table acl command to display routing information
permitted by the IPv6 ACL.
If the specified IPv6 ACL is not available, all routing information is displayed.
Examples
# Display brief routing information permitted by ACL 2000.
<Sysname> display ipv6 routing-table acl 2000
Routes Matched by Access list
Summary Count : 2
Destination : ::1/128
NextHop
Interface
Destination : 1:1::/64
NextHop
Interface
Refer to

1.1.13 display ipv6 routing-table ipv6-address

Syntax
display ipv6 routing-table ipv6-address prefix-length [ longer-match ] [ verbose ]
View
Any view
Parameters
ipv6-address: Destination IPv6 address.
prefix-length: Prefix length, in the range 0 to 128.
longer-match: Displays the matched route having the longest prefix length.
verbose: Displays both active and inactive verbose routing information. Without this
keyword, only brief active routing information is displayed.
: ::1
: InLoop0
: ::
: NULL0
Table 1-9 for description about the above output.
Chapter 1 Routing Overview Commands
2000 :
Protocol
Preference : 0
Cost
Protocol
Preference : 60
Cost
1-19
: Direct
: 0
: Static
: 0