H3C S7500E Series Command Manual page 107

Command Manual – IP Addressing and Performance
H3C S7500E Series Ethernet Switches
socket state = SS_PRIV
Task = TRAP(71), socketid = 1, Proto = 17,
LA = 0.0.0.0:1025, FA = 0.0.0.0:0,
sndbuf = 9216, rcvbuf = 0, sb_cc = 0, rb_cc = 0,
socket option = SO_UDPCHECKSUM,
socket state = SS_PRIV
Task = RDSO(75), socketid = 2, Proto = 17,
LA = 0.0.0.0:1812, FA = 0.0.0.0:0,
sndbuf = 9216, rcvbuf = 41600, sb_cc = 0, rb_cc = 0,
socket option = SO_UDPCHECKSUM,
socket state = SS_PRIV
SOCK_RAW:
Task = ROUT(86), socketid = 2, Proto = 65,
LA = 0.0.0.0, FA = 0.0.0.0,
sndbuf = 32767, rcvbuf = 256000, sb_cc = 0, rb_cc = 0,
socket option = 0,
socket state = SS_PRIV SS_NBIO SS_ASYNC
Task = ROUT(86), socketid = 1, Proto = 2,
LA = 0.0.0.0, FA = 0.0.0.0,
sndbuf = 32767, rcvbuf = 256000, sb_cc = 0, rb_cc = 0,
socket option = SO_SENDVPNID(0) SO_RCVVPNID(0),
socket state = SS_PRIV SS_NBIO SS_ASYNC
Table 2-4 Description on the fields of the display ip socket command
SOCK_STREAM
SOCK_DGRAM
SOCK_RAW
Task
socketid
Proto
LA
FA
sndbuf
rcvbuf
Field
TCP socket
UDP socket
raw IP socket
Task number
Socket ID
Protocol number of the socket
Local address and local port number
Remote address and remote port number
sending buffer size of the socket
receiving buffer size of the socket
Chapter 2 IP Performance Configuration
Description
2-8
Commands