H3C S7500E Series Command Manual page 89

Command Manual – VLAN
H3C S7500E Series Ethernet Switches
View
Any view
Parameters
interface interface-list: Specifies an Ethernet port list, in the format of { interface-type
interface-number [ to interface-type interface-number ] }&<1-10>, where &<1-10>
means that you can specify up to 10 port ranges. A port range defined without the to
interface-type interface-number portion comprises only one port.
Description
Use the display gvrp statistics command to display the GVRP statistics of specified
or all trunk ports.
Note that if the interface interface-list is not provided, the GVRP statistics of all trunk
ports will be displayed. Otherwise, only the GVRP statistics of all the specified trunk
port will be displayed.
Examples
# Display statistics about GVRP for trunk port Ethernet 2/0/1.
<Sysname> display gvrp statistics interface ethernet 2/0/1
Table 4-2 Description on the fields of the display gvrp statistics command
GVRP Status
GVRP Running
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type
GVRP statistics on port Ethernet2/0/1
GVRP Status
GVRP Running
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type
Field
Chapter 4 GARP/GVRP Configuration Commands
Description
Indicates whether GVRP is enabled or disabled.
Indicates whether GVRP is running.
Indicates the number of GVRP registration failures.
Indicates the source MAC address in the last
GVRP PDU.
Indicates the GVRP registration type on the port.
4-7
: Enabled
: YES
: 0
: 0000-0000-0000
: Normal