H3C S7500E Series Command Manual page 244

Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
Character
*
+
Description
Use the display ip routing-table command to display brief information about active
routes in the routing table.
Use the display ip routing-table verbose command to display detailed information
about all routes in the routing table.
Examples
# Display brief information about active routes in the routing table.
<Sysname> display ip routing-table
Routing Tables: Public
Destination/Mask
10.10.3.0/24
10.10.3.1/32
127.0.0.0/8
127.0.0.1/32
192.168.0.0/24
192.168.0.72/32
Table 1-4 Description on the fields of the display ip routing-table command
Field
Destinations
Routes
Destination/Mask
Proto
Pre
Cost
Meaning
Asterisk, indicates that
the character(s) to its
left can appear 0 or
more times.
Plus, indicates that the
character(s) to its left
can appear one or
more times.
Destinations : 6
Proto Pre
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Number of destination addresses
Number of routes
Destination address/mask length
Protocol that presents the route
Priority of the route
Cost of the route
Chapter 1 Routing Overview Commands
zo* matches z and zoo.
zo+ matches zo and zoo, but not z.
Routes : 6
Cost NextHop
0 10.10.3.1
0 127.0.0.1
0 127.0.0.1
0 127.0.0.1
0 192.168.0.72
0 127.0.0.1
Description
1-4
Remarks
Interface
Vlan2
InLoop0
InLoop0
InLoop0
Vlan1
InLoop0