Rip Poison-Reverse; Rip Split-Horizon - H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Use the undo rip output command to disable the interface from sending RIP
messages.
Sending RIP messages is enabled on an interface by default.
Related commands: rip input.
Examples
# Disable VLAN-interface 10 from receiving RIP messages.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] undo rip output

2.1.24 rip poison-reverse

Syntax
rip poison-reverse
undo rip poison-reverse
View
Interface view
Parameters
None
Description
Use the rip poison-reverse command to enable the poison reverse function.
Use the undo rip poison-reverse command to disable the poison reverse function.
By default, the poison reverse function is disabled.
Examples
# Enable the poison reverse function for RIP routing updates on VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rip poison-reverse

2.1.25 rip split-horizon

Syntax
rip split-horizon
undo rip split-horizon
Chapter 2 RIP Configuration Commands
2-22