H3C S7500E Series Command Manual page 253

Command Manual – IP Routing Overview
H3C S7500E Series Ethernet Switches
# Display brief information about active routes permitted by the prefix list test.
[Sysname] display ip routing-table ip-prefix test
Routes Matched by Prefix list : test
Summary Count : 2
Destination/Mask
2.2.2.0/24
2.2.2.1/32
For detailed description of the above output, see
# Display detailed information about both active and inactive routes permitted by IP
prefix list test.
[Sysname] display ip routing-table ip-prefix test verbose
Routes Matched by Prefix list
Summary Count : 2
Destination: 2.2.2.0/24
Protocol: Direct
Preference: 0
NextHop: 2.2.2.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
Destination: 2.2.2.1/32
Protocol: Direct
Preference: 0
NextHop: 127.0.0.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
For detailed description of the above output, see
1.1.7 display ip routing-table protocol
Syntax
display ip routing-table protocol protocol [ inactive | verbose ]
Proto Pre
Direct
Direct
State: Active Adv
Tag: 0
State: Active NoAdv
Tag: 0
Chapter 1 Routing Overview Commands
Cost NextHop
0 0 2.2.2.1
0 0 127.0.0.1
Table
test :
Process ID: 0
Cost: 0
Interface: Vlan2
Neighbour: 0.0.0.0
Label: NULL
Process ID: 0
Cost: 0
Interface: InLoop0
Neighbour: 0.0.0.0
Label: NULL
Table
1-13
Interface
Vlan2
InLoop0
1-4.
Age: Od00h20m52s
Age: Od00h20m52s
1-5.