Bpdu Tunneling Configuration Commands; Bpdu-Tunnel Dot1Q Stp - H3C S7500E Series Command Manual

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – QinQ-BPDU Tunneling

H3C S7500E Series Ethernet Switches

Chapter 2 BPDU Tunneling Configuration

2.1 BPDU Tunneling Configuration Commands

bpdu-tunnel dot1q stp

undo bpdu-tunnel dot1q stp

Ethernet port view, port group view

Use the bpdu-tunnel dot1q stp command to enable BPDU tunneling for STP on the

current port or ports.

Use the undo bpdu-tunnel dot1q stp command to disable BPDU tunneling for STP on

the port or ports.

By default, the BPDU tunneling for STP is disabled.

Configured in Ethernet port view, the setting is effective on the current port only;

configured in port group view, the setting is effective on all ports in the port group.

Before you can enable BPDU tunneling for STP on a port, you need to enable BPDU

tunneling and disable STP on the port.

Relative command: bpdu-tunnel dot1q enable.

# Enable BPDU tunneling for STP on Ethernet 2/0/1.

<Sysname> system-view

[Sysname] interface ethernet 2/0/1

[Sysname-Ethernet2/0/1] stp disable

[Sysname-Ethernet2/0/1] bpdu-tunnel dot1q stp

# Enable BPDU tunneling for STP on all the ports of port group 1.

Chapter 2 BPDU Tunneling Configuration Commands

Table of Contents