H3C S7500E Series Command Manual page 320

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches
Table 3-3 Description on the fields of the display ospf brief command
RouterID
Border Router
Route Tag
Multi-VPN-Instance is not
enabled
Applications Supported
SPF-schedule-interval
LSA generation interval
LSA arrival interval
Default ASE Parameter
Route Preference
ASE Route Preference
SPF Computation count
RFC1583 Compatible
Graceful restart interval
Area Count
Nssa Area Count
ExChange/Loading Neighbors
Area
Authtype
Area flag
SPF scheduled Count
Interface
Cost
State
Type
MTU
Priority
Designated Router
Backup Designated Router
Field
Router ID
ABR, ASBR or NSSA ABR
The tag of redistributed routes
The OSPF process does not support
multi-VPN-instance.
Applications supported
Interval for SPF calculations
LSA generation interval
Minimum LSA repeat arrival interval
Default ASE Parameters: metric, tag, route type.
Internal route priority
External route priority
SPF computation count of the OSPF process
Compatible with routing rules defined in
RFC1583
GR restart interval
Area number of the current process
NSSA area number of the current process
Neighbors in ExChange/Loading state
Area ID in the IP address format
Authentication type of the area:
Non-authentication, simple authentication, or
MD5 authentication
The type of the area
SPF calculation count in the OSPF area
IP address of the interface
Interface cost
Interface state
Interface network type
Interface MTU
Router priority
The Designated Router
The Backup Designated Router
3-13
Chapter 3 OSPF Configuration Commands
Description