Link Aggregation Configuration Commands; Display Lacp System-Id; Display Link-Aggregation Interface - H3C S7500E Series Command Manual

Command Manual – Link Aggregation
H3C S7500E Series Ethernet Switches
Chapter 1 Link Aggregation Configuration

1.1 Link Aggregation Configuration Commands

1.1.1 display lacp system-id

Syntax
display lacp system-id
View
Any view
Parameters
None
Description
Use the display lacp system-id command to display the local system ID (also called
the actor system ID), which comprises the system LACP priority and the system MAC
address.
Examples
# Display the local system ID.
<Sysname> display lacp system-id
Actor System ID: 0x8000, 0000-fc00-0100

1.1.2 display link-aggregation interface

Syntax
display link-aggregation interface interface-type interface-number [ to interface-type
interface-number ]
View
Any view
Parameters
interface interface-type interface-number [ to interface-type interface-number ]:
Specifies a port range or a port if the to keyword and the second port are not specified.
Chapter 1 Link Aggregation Configuration Commands
Commands
1-1