Display Ip-Subnet-Vlan Vlan - H3C S7500E Series Command Manual

Command Manual – VLAN
H3C S7500E Series Ethernet Switches
VLAN ID
=======================================================
3
Table 1-4 Description on the fields of the display ip-subnet-vlan interface command
Interface
VLAN ID
Subnet-Index
IP ADDRESS
NET MASK

1.4.2 display ip-subnet-vlan vlan

Syntax
display ip-subnet-vlan vlan { vlan-id [ to vlan-id ] | all }
View
Any view
Parameters
vlan-id: VLAN ID, in the range 1 to 4094.
to: Specifies a VLAN ID range, the argument to the right of this keyword must be
greater than or equal to that to the left of this keyword.
all: Specifies all the VLANs.
Description
Use the display ip-subnet-vlan vlan command to display the IP subnet information
and IP subnet index on the specified VLAN(s).
Related commands: display vlan.
Examples
# Display the IP subnet information of all VLANs.
<Sysname> display ip-subnet-vlan vlan all
VLAN ID:
Subnet Index
====================================================
0
Subnet-Index IP ADDRESS
0
Field
Interface of which you want to view the information
VLAN ID
Index of the subnet
IP address of the subnet (can be either an IP address
or network address)
Mask of IP subnet
3
IP Address
192.168.1.0
Chapter 1 VLAN Configuration Commands
NET MASK
192.168.1.0 255.255.255.0
Description
Subnet Mask
255.255.255.0
1-21